Skip to end of metadata
Go to start of metadata

Refer to these sections for details:

Websitehttp://www.deltadriver.com

PLC Connection Settings

ParametersRecommendedOptionsNotes
PLC TypeBeckhoff ADS/AMS (Ethernet)
PLC Interface
Ethernet

Port #
44898

ADS port801801, 811, 821, 831,851
PLC station #
0

Supported Series

Twincat 2

Websitehttps://www.beckhoff.com/

LoopEdge DeviceHub Configuration

To configure DeviceHub for this Beckhoff PLC:

  1. DeviceHub > Add Device
    Type: Beckhoff
    Driver: Beckhoff ADS/AMS Ethernet

  2. Enter details specific to your environment and click Add Device.

    Network Address: IP address of the PLC
    Network Port: 48898 
    ADS port: PLC port
    AMS id: LoopEdge Ip address.1.1 (eg x.x.x.x.1.1 where x.x.x.x is loopedge ip)
    Local Ams id: LoopEdge IP address.




    NOTE: Make sure loopedge IP address is configured in TWINCAT.

Device Addresses

Bit/Word

Device Type

Format

Range

Memo

B

I

DDDDDdd

0 ~ 6553515


BQDDDDDdd0 ~ 6553515
BMDDDDDdd0 ~ 6553515
WIDDDDD0 ~ 65535
WQDDDDD0 ~ 65535
WMDDDDD0 ~ 65535
  • No labels