Refer to these sections for details:
Supported Series
Mitsubishi FX2N-10GM/20GM PLC
Website: http://www.mitsubishi-automation.com/
PLC Connection Settings
Parameters | Recommended | Options | Notes |
---|---|---|---|
PLC Type | Mitsubishi FX2N-10GM/20GM | ||
PLC Interface | RS485 4W | ||
Baud Rate | 9600 | ||
Data Bits | 8 | ||
Parity | Even | ||
Stop Bits | 1 | ||
PLC Station # | 0 |
PLC Configuration
The setup shown here is for the Mitsubishi FX2N-10GM module.
Online simulator: YES
Extend address mode: NO
LoopEdge DeviceHub Configuration
To configure DeviceHub for this Mitsubishi FX2N-10GM PLC:
- DeviceHub > Add Device
Type: Mitsubishi
Driver: Mitsubishi FX2N-10GM/20GM - Enter details specific to your environment and click Add Device.
Device Addresses
Bit/Word | Device Type | Format | Range | Memo |
---|---|---|---|---|
B | X | OOO | 0 ~ 67 | Input Relay |
B | Y | OOO | 0 ~ 67 | Output Relay |
B | M | DDDD | 0 ~ 511 | Auxiliary Relay |
B | SM | DDDD | 9000 ~ 9175 | Special Auxiliary Relay |
W | X_W | OOO | 0 ~ 67 | |
B | Y_W | OOO | 0 ~ 67 | |
B | M_W | DDD | 0 ~ 511 | |
B | SM_W | DDDD | 9000 ~ 9175 | |
W | D | DDDD | 0 ~ 6999 | Data Register |
W | SD | DDDD | 9000 ~ 9599 | Special Data Register |
W | V | D | 0 ~ 7 | Index register |
W | Z | D | 0 ~ 7 | Index register |