Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Refer to the following sections on this page to configure remote access to LoopEdge:

Configure Cloud Connectivity
Anchor
ConfigureCloudConnectivity
ConfigureCloudConnectivity

...

  1. Create a LoopEdge Model by selecting the MQTT plain TCP connection. See Create a Device Model.
    Note that the model's JASON schema includes a remote network parameter.

    No Format
    {
      "mqttHostName": "%MQTT_HOST%",
      "mqttTcpPort": "%MQTT_TCP_PORT%",
      "mqttUserName": "%MQTT_USERNAME%",
      "mqttPassword": "%MQTT_PASSWORD%",
      "mqttClientId": "%MQTT_CLIENT_ID%",
      "mqttReqTopicName": "%MQTT_REQ_TOPIC%",
      "mqttRespTopicName": "%MQTT_RESP_TOPIC%",
      "mqttDataTopicName": "%MQTT_DATA_TOPIC%",
      "remoteNetwork": "%REMOTE_NETWORK%"
    }


  2. From the LoopEdge model, create a LoopEdge Device. See Add a Device from a Model.
  3. In the LoopCloud navigation panel, go to Device Mgmt > Devices to view the newly created device in the list.
  4. In the device's Action list, click Status and select Activate.



    Note
    titleNote
    This one-time-only code is valid for only 60 seconds. Be sure to take the following LoopEdge steps immediately.


  5. In the Activation Code pop-up, click the  icon to copy the code to the clipboard.

...

Note
titlePrerequisites
  • Before taking the following steps, complete the steps listed in: Configure Cloud Connectivity.
  • You will need the Loop RemoteAccess application to set up a network.

...

  1. In the LoopCloud navigation panel, click Remote.

    Include Page
    _img_LoopCloud_RemoteNetwork
    _img_LoopCloud_RemoteNetwork


  2. Click the + icon in the upper right of the window to add a member to the network.
  3. In the Add new member dialog, paste the Node ID that you copied from the Loop RemoteAccess service and click Save.



    The node will be listed in the Remote Network list, as part of your network.

  4. At the top of the LoopCloud Remote Network window, click the  icon to copy the network ID.
    You will use this ID in the next step, in the remote access service, to join the network. This establishes the handshake between the private network and the Loop platform.

...