Page tree
Skip to end of metadata
Go to start of metadata

Refer to these sections for details:

Supported Series

Mitsubishi Q series (Q03UDE, Q04UDEH, Q06UDEH, Q10UDEH, Q13UDEH, Q20UDEH, Q26UDEH, Q02UD), Mitsubishi L series(L02, L26-BT), MELSEC-Q/L protocol application to CPU of Ethernet interface or Ethernet module.

Website: http://www.mitsubishi-automation.com

PLC Connection Settings

ParametersRecommendedOptionsNotes
PLC TypeMitsubishi MELSEC-Q/L - Binary Mode (Ethernet)

PLC InterfaceEthernet

Port #50021025 ~ 4999 or 5010 ~ 65534
PLC Station #255255
Network #00 ~ 255
ProtocolTCPTCP / UDPMC Protocol

PLC Configuration

Online simulator: YES

LoopEdge DeviceHub Configuration

To configure DeviceHub for this Mitsubishi Melsec-Q PLC:

  1. DeviceHub > Add Device
    Type: Mitsubishi
    Driver: Mitsubishi Melsec-Q-Binary



  2. Enter details specific to your environment and click Add Device.

Device Addresses

Bit/Word

Device Type

Format

Range

Description

BXDDDDD0 ~ 65536Input Relay
BYDDDDD0 ~ 65536Output Relay
BMDDDDD0 ~ 65535Internal Relay
BSMDDDD0 ~ 2047
BLDDDDD0 ~ 32237Latch Relay
BFDDDDD0 ~ 32237Annunciator
BVDDDDD0 ~ 32237Edge Relay
BBDDDDD0 ~ 32237Link Relay
BTSDDDDD0 ~ 25471Timer Contact
BTCDDDDD0 ~ 25471Timer Coil
BSSDDDDD0 ~ 25471Retentive Timer Contact
BSCDDDDD0 ~ 25471Retentive Timer Coil
BCSDDDDD0 ~ 25471Counter Contact
BCCDDDDD0 ~ 25471Counter Coil
BSBDDDDD0 ~ 32237Special Link Relay
BSDDDD0 ~ 8191Step Relay
BDXDDDD0 ~ 8191Direct Input
BDYDDDD0 ~ 8191Direct Output
WDDDDD

0 ~ 9999

Data Register
WWDDDD0 ~ 8191
WTNDDDDD0 ~ 25471Timer Current Value
WSNDDDD0 ~ 25471Retentive Timer Current Value
WCNDDDDD0 ~ 25471Counter Current Value
WSDDDDD

0 ~ 2047

Special Register
WRDDDD0 ~ 9999File Register
WZRDDDDDD0 ~ 999999File Register
WZDD0 ~ 20Index Register
  • No labels