Skip to end of metadata
Go to start of metadata

Refer to these sections for details:

Supported Series

OPTO22 SNAP PAC System

Website: http://www.opto22.com/

PLC Connection Settings

ParametersRecommendedOptionsNotes
PLC TypeOPTO22 MMIO Protocol (Ethernet)
PLC InterfaceEthernet

Port #2001

PLC Configuration

The setup shown here is for the OPTO22 module.

Online Simulator: Yes

Multi-HMI connect: Yes

LoopEdge DeviceHub Configuration

To configure DeviceHub for this OPTO22 PLC:

  1. DeviceHub > Add Device
    Type: Opto
    Driver: Opto22 Ethernet



  2. Enter details specific to your environment and click Add Device.

Device Addresses

Bit/Word

Device Type

Format

Range

Description

BSTATEDD0 ~ 63Read / Write
BONLATCHDD0 ~ 63Read
BOFFLATCHDD0 ~ 63Read
BACTIVECOUNTERDD0 ~ 63Read / Write
BONLATCH_READCLEARDD0 ~ 63Read
BOFFLATCH_READCLEARDD0 ~ 63Read
BHDD_STATEDDdd0 ~ 1531Read / Write
BHDD_ONLATCHDDdd0 ~ 1531Read
BHDD_OFFLATCHDDdd0 ~ 1531Read
BHDD_ONLATCH_CLEARDDdd0 ~ 1531Write
BHDD_OFFLATCH_CLEARDDdd0 ~ 1531Write
BALARM_HI_STATEDD0 ~ 63Read
BALARM_HI_ENABLEDD0 ~ 63Read / Write
BALARM_LO_STATEDD0 ~ 63Read
BALARM_LO_ENABLEDD0 ~ 63Read / Write
BSP_BITDD0 ~ 63Read / Write
WEUDD0 ~ 63Read / Write
WCOUNTSDD0 ~ 63Read / Write
WMINDD0 ~ 63Read
WMAXDD0 ~ 63Read
WMIN_READCLEARDD0 ~ 63Read
WMAX_READCLEARDD0 ~ 63Read
WEU_4096DDDD0 ~ 4095Read / Write
WCOUNTS_4096DDDD0 ~ 4095Read / Write
WMIN_4096DDDD0 ~ 4095Read
WMAX_4096DDDD0 ~ 4095Read
WMIN_READCLEAR_4096DDDD0 ~ 4095Read
WMAX_READCLEAR_4096DDDD0 ~ 4095Read
WCOUNTERDATADD0 ~ 63Read
WCOUNTERDATA_READCLEARDD0 ~ 63Read
WHDD_COUNTERDD0 ~ 15Read
WHDD_COUNTER_READCLEARDD0 ~ 15Read
WHDD_BANK_STATEDD0 ~ 15Read / Write
WHDD_BANK_ONLATCHDD0 ~ 15Read
WHDD_BANK_OFFLATCHDD0 ~ 15Read
WHDD_BANK_ONLATCH_CLEARDD0 ~ 15Write
WHDD_BANK_OFFLATCH_CLEARDD0 ~ 15Write
WMODULETYPEDD0 ~ 63Read / Write
WPOINTTYPEDD0 ~ 63Read / Write
WFEATUREDD0 ~ 63Read / Write
WOFFSETDD0 ~ 63Read / Write
WGAINDD0 ~ 63Read / Write
WHISCALEDD0 ~ 63Read / Write
WLOSCALEDD0 ~ 63Read / Write
WMODULETYPE_4096DDDD0 ~ 4096Read
WPOINTTYPE_4096DDDD0 ~ 4096Read / Write
WFEATURE_4096DDDD0 ~ 4096Read / Write
WOFFSET_4096DDDD0 ~ 4096Read / Write
WGAIN_4096DDDD0 ~ 4096Read / Write
WMODUHISCALE_4096DDDD0 ~ 4096Read / Write
WLOSCALE_4096DDDD0 ~ 4096Read / Write
WALARM_HI_SETPOINTDD0 ~ 63Read / Write
WALARM_HI_DEADBANDDD0 ~ 63Read / Write
WALARM_LO_SETPOINTDD0 ~ 63Read / Write
WALARM_LO_DEADBANDDD0 ~ 63Read / Write
WSP_INTEGERDDDDD0 ~ 10239Read / Write
WSP_FLOATDDDDD0 ~ 10239Read / Write
WSP_STRINGDDDD0 ~ 6300Read / Write
WPID_CV_INDDD0 ~ 127Read
WPID_CV_SPDDD0 ~ 127Read
WPID_CV_OUTDDD0 ~ 127Read / Write
WPID_CV_FFDDD0 ~ 127Read / Write
WPID_CV_ERRORDDD0 ~ 127Read
WPID_CV_PDDD0 ~ 127Read
WPID_CV_IDDD0 ~ 127Read
WPID_CV_DDDD0 ~ 127Read
WPID_CV_INTEGRALDDD0 ~ 127Read
WPID_LSV_INDDD0 ~ 127Read / Write
WPID_LSV_SPDDD0 ~ 127Read / Write
WPID_STATUSDDD0 ~ 127Read / Write
WPID_STATUS_ONDDD0 ~ 127Read / Write
WPID_STATUS_OFFDDD0 ~ 127Read / Write
WPID_TUNE_PDDD0 ~ 127Read / Write
WPID_TUNE_IDDD0 ~ 127Read / Write
WPID_TUNE_DDDD0 ~ 127Read / Write
WPID_TUNE_FFDDD0 ~ 127Read / Write
WPID_CFG_MAX_OUTDDD0 ~ 127Read / Write
WPID_CFG_MIN_OUTDDD0 ~ 127Read / Write
WPID_CFG_SCAN_TIMEDDD0 ~ 127Read / Write
WPID_CFG_LOW_RANGEDDD0 ~ 127Read / Write
WPID_CFG_HI_RANGEDDD0 ~ 127Read / Write
WPID_CFG_ALGDDD0 ~ 127Read / Write
WPID_CFG_MAN_MODEDDD0 ~ 127Read / Write
WPID_CFG_FLAGSDDD0 ~ 127Read / Write
WPID_CFG_FLAGS_ONDDD0 ~ 127Read / Write
WPID_CFG_FLAGS_OFFDDD0 ~ 127Read / Write
WPID_CFG_MM_INDDD0 ~ 127Read / Write
WPID_CFG_MM_SPDDD0 ~ 127Read / Write
WPID_CFG_MM_OUTDDD0 ~ 127Read / Write
WPID_SCALE_IN_LOWDDD0 ~ 127Read / Write
WPID_SCALE_IN_HIDDD0 ~ 127Read / Write
WPID_SCALE_OUT_LOWDDD0 ~ 127Read / Write
WPID_SCALE_OUT_HIDDD0 ~ 127Read / Write
WPID_SCAN_COUNTERDDD0 ~ 127Read / Write
  • No labels